D621 Series
|
User's Guide | Reset The System (Cmd 47)
Bosch Security Systems | 8/04 |
45
Reset The System (Cmd 47)
o
I can perform this command.
o
I cannot perform this command.
Use this command to reset the system (including fire points)
after an alarm. Detection devices, such as smoke detectors and
shock sensors, must be reset after being activated. Resetting
the system takes about 20 seconds.
If points do not reset, contact your security company for help.
1.
Ensure your system is off (All and Part indicators are off).
2.
Press [Cmd] [4] [7]. The keypad may prompt you to enter
a valid passcode by flashing the Cmd indicator.
3.
Enter your passcode if necessary. The system now resets.
After the system resets, the keypad automatically exits this
command.
Turn Watch On/Off (Cmd 61)
o
I can perform this command.
o
I cannot perform this command.
Use the Watch feature to “watch” points when the system is
off. For example, parents with small children may want a tone
to sound whenever a door or window is opened as a way of
monitoring the location of the children.
Use this command to turn the watch feature on and off.
Once you have programmed the system with points to watch
(refer to Select Watch Points on page 48) and the responses
(refer to Select Watch Tone on page 46), you need to turn the
watch function on and off.
1.
Make sure your system is off (All and Part indicators are
off).
2.
Press [Cmd] [6] [1]. The keypad may prompt you to enter
a valid passcode by flashing the Cmd indicator.
