D621 Series
|
User's Guide | Bypass Points
Bosch Security Systems | 8/04 |
27
Bypass Points
o
I can perform this command.
o
I cannot perform this command.
Use this command to bypass one or more points before
turning the system All On, Part On, or Part 2 On. When a
point is bypassed, it can be faulted without starting an alarm
event.
For example, your kitchen has just been painted and you want
to leave the windows open but still turn on the system.
Bypassing points allows the system to be on but prevents it
from monitoring undesired points.
1.
Ensure the system is turned off (All and Part indicators are
not illuminated).
2.
Press [BYPASS]. The keypad may prompt you to enter a
valid passcode by flashing the Cmd indicator.
3.
Enter your passcode if necessary.
4.
Enter the Point Number that you want to bypass followed
by the [*] key. For example, if you want to bypass Point
10, enter [1] [0] [*]. Repeat this step until all points that
are required to be bypassed are programmed.
Figure 11: Bypassed Points
1
2
3
4
5
6
7
8
9
10
11
12 13 14 15 16
All
Cmd
Pa rt
Status
Bypassed points flash on the keypad (Figure 11).
To un-bypass a point, repeat the steps above for the
desired point number.
5.
Press [Cmd] to exit this command.
