D621 Series
|
User's Guide | Delete A Passcode (Cmd 58)
Bosch Security Systems | 8/04 |
35
Delete A Passcode (Cmd 58)
o
I can perform this command.
o
I cannot perform this command.
Use this command to delete passcodes. This command
requires the appropriate authority level to delete passcodes.
You cannot delete your own passcode using this
command.
1.
Make sure the system is turned off (All and Part indicators
are off).
2.
Press [Cmd] [5] [8]. The keypad may prompt you to enter
a valid passcode by flashing the Cmd indicator.
3.
Enter your passcode. The available user numbers flash.
Figure 16: Available User Numbers
1
2
3
4
5
6
7
8
9
10
11 12 13 14 15 16
All
Cmd
Part
Status
4.
Enter the user number you want to delete. (For example,
press [2] [*] to delete User 2). You cannot delete yourself
as a user.
If the user does not exist in the system as set up
by your security company, the keypad emits an
error tone.
5.
Press [Cmd] to exit this command.
