14
Climate 5000 MS – 6720887246 (2018/04)
Wiring
8.2
Wiring Figure
CAUTION
Connect the connective cables to the terminals, as identified, with their matching numbers on the terminal block of the indoor and outdoor units.
Terminal L1(A) of the outdoor unit must connect with terminal L1 on the indoor unit.
POWER
POWER
TO A
TO A
TO B
TO B
Fig. 23.
NOTE:
Refer to the following figures if end-users wish to perform their own wiring. Run the main power cord through the lower line-outlet of the cord clamp.
One-twin models:
L(A)
S(A)
N(A)
L(B) N(B) S(B)
W L
N L( 1)
POWER
POWER
POWER
POWER
SUPPLY
POWER
POWER
Model B
Model A
Model E
Model F
Model G
Model C
Model D
POWER
OPTION
AL
OPTION
AL
OPTION
AL
OPTION
AL
OPTION
AL
OPTION
AL
OPTION
AL
OPTION
AL
OPTION
AL
OPTION
AL
OPTION
AL
OPTION
AL
OPTION
AL
OPTION
AL
OPTION
AL
OPTION
AL
OPTION
AL
OPTION
AL
OPTION
AL
OPTION
AL
OPTION
AL
TO A
TO A
TO A
TO A
TO A
TO A
TO A
TO B
TO B
TO B
TO B
Y/G
TO B
TO B
TO B
Fig. 24.
NOTE:
Use the magnetic ring (not supplied, optional part) to attach the connective cable of indoor and outdoor units after installation. One magnetic
ring is used for one cable.
