Initial operation
BT 50 HP – 6 720 821 241 (2017/09)
37
6
Initial operation
6.1
Customer hand over
The installer must explain to the customer (user) the mode of operation
and the handling of the heating appliance and the storage tank.
▶ Hand all enclosed documents over to the user.
6.2
Start of operation
Start of operation has to be done by the installer of the heating system or
by a technical expert.
▶ Start the operation of the heat pump in accordance to the
manufacturers information, installation or instruction manuals.
7
De-commissioning
7.1
De-commissioning the system when there is a risk of
frost
▶ When the heating system is not in use and there is a risk of frost, de-
commission the heating system in accordance with the heat pump
(or other accessories) instruction manual.
7.2
Environmental protection
Environmental protection is a key company commitment for the Bosch
Group.
Quality of performance, efficiency and environmental protection are our
long term objectives. Legal and corporate guidelines are strictly adhered
to.
To protect the environment we utilise the most efficient processes,
technology and materials
Packaging
We are dedicated in adhering to country specific disposal standards as
they relate to packaging to ensure optimum recycling. All packaging
materials are environmentally friendly and can be recycled.
Obsolete equipment
Obsolete products contain raw materials that can be recycled.
The components are easily separated and are clearly marked. In this
manner the individual components are easily sorted and added into the
recycling and disposal systems.
7.3
Disposal
▶ Dispose of the storage tank packaging in an environmentally sound
method.
▶ Dispose of the storage tank in an environmentally sound method at
an appropriate disposal facility.
8
Servicing
Apart from occasional visual inspection, storage tanks do not require
any particular servicing or cleaning.
▶ Use original spare parts only!
Spare parts
Emptying
▶ If required, empty the storage tank via the drain valve at the bottom
of the tank, see fig. 2, page 34.
Sensor pocket R ½ 95mm
5 446 142
Drain valve ½ inch
6 300 597 4
Installation & servicing instructions primary
water storage 50 litres
6 720 803 559 0
Table 4
WARNING:
Risk of scalding!
Hot water can cause severe scalding
▶ Allow the storage tank time to cool down after de-
commissioning.
