Bosch Power Tec GmbH
Storage system |
User manual
En
g
lis
h
DO_BA_2013_H
Y
B
_A_3ENG_BBo
17.01
.2014
English
Changing the settings | 63
Info
If the storage system is connected to the Internet, we
recommend that you set the IP address automatically.
In addition, having your system connected to the
Internet enables better system support.
6.7
System settings
Depending on the country of installation, the grid
operator or the connection installed (e.g. max.
effective installed load of 3 kW) may require a
reduction in the maximum power fed into the grid
connection point. You can change these settings to
reduce the maximum power fed into the grid
connection point. This power can either be calculated
from the peak power installed (kWp) or preset by the
mains connection.
Here, you should enter the total power of the system
connected.
You want to change the settings of the solar
generator's PV power in the
Plant
window.
Prerequisites
You have received the password from the
manufacturer's service department.
Contact details can be found on the back of this
instruction manual.
▶
Procedure
1. Start window: Press
System
>
Settings
>
Plant
The
Plant
window opens.
