Bosch AutoDome Junior HD VJR Series, Operation Manual

Page: 8 / 114

Notice!
This symbol indicates information or a company policy that relates directly or indirectly to the
safety of personnel or protection of property.
Important Notices
Accessories - Do not place this unit on an unstable
stand, tripod, bracket, or mount. The unit may fall, causing serious injury to persons and/or
severe damage to the unit. Use only with the cart, stand, tripod, bracket, or table specified by
the manufacturer. When a cart is used, exercise caution and care when moving the cart/
apparatus combination to avoid tipping it over, which could result in injury. Quick stops,
excessive force, or uneven surfaces may cause the cart/unit combination to overturn. Mount
the unit in line with the manufacturer's instructions.
All-pole power switch - Incorporate an all-pole power switch, with a contact separation of at
least 3 mm in each pole, into the electrical installation of the building. If it is needed to open
the housing for servicing and/or other activities, use this all-pole switch as the main
disconnect device for switching off the voltage to the unit.
Camera grounding - When mounting the camera in potentially damp environments, ensure the
system is grounded through the metal housing of the unit (see section: Connecting the
Power).
Camera signal - Protect the cable with a primary protector if the camera signal is over 140
feet, in accordance with NEC800 (CEC Section 60).
Coax grounding:
–
Ground the cable system if connecting an outside cable system to the unit.
– Connect equipment to the unit's inputs only after this unit has had its grounding plug
connected to a grounded outlet or its ground terminal is properly connected to a ground
source.
– Disconnect the unit's input connectors from equipment before disconnecting the
grounding plug or grounding terminal.
– Follow proper safety precautions, such as grounding, for any device connected to this
unit.
U.S.A. models only - Section 810 of the National Electrical Code, ANSI/NFPA No. 70, provides
information regarding proper grounding of the mount and supporting structure, grounding of
the coax to a discharge unit, size of grounding conductors, location of discharge unit,
connection to grounding electrodes, and requirements for the grounding electrode.
1.3
8 en | Safety AutoDome Junior HD Series
2014.11 | 6.1 | F.01U.275.803 Operation Manual Bosch Security Systems, Inc.