AUTODOME IP 4000 HD
Installing a Surface Mount and Camera | en
27
Bosch Security Systems
Installation Manual
2015.11 | 1.1 |
Figure 9.5: Indicator for correct point of connection
9.5
Installing the Camera to the Mounting Plate
1.
Route the cables from the ceiling out of the side of the mounting plate with the crescent-
shaped cut-out.
2.
Attach the hook of the safety tether from the adapter to the bottom of the camera.
3.
Connect ground wire from the ground lug on the adapter to the center terminal on the 3-
pin terminal block for 24 VAC at the bottom of the camera.
4.
Connect the mating connectors from the user-supplied cables from the ceiling to the
matching connectors from the camera. Refer to the chapter
Connection, page 49
for
more information.
Summary of Contents for Autodome IP 4000 HD
Page 1: ...AUTODOME IP 4000 HD NEZ 4112 PPCW4 NEZ 4212 PPCW4 NEZ 4112 CPCW4 en Installation Manual ...
Page 2: ......
Page 56: ......
