AUTODOME IP 4000 HD
Installing a Surface Mount and Camera | en
25
Bosch Security Systems
Installation Manual
2015.11 | 1.1 |
9.4
Installing the Surface Mount Adapter
1.
Determine a secure location for mounting the surface mount adapter (NEZ-A4-SMB) and
the camera.
2.
Use the adapter as a template to mark the installation location for four (4) M4 or #10 pan
head screws (with a minimum length of 10 mm (0.39 in.)) (user-supplied).
3.
Drill the four (4) holes in the installation location.
4.
Attach the surface mount adapter to the surface using the four screws.
x4 T5
Figure 9.2: Mount with 4 screws
5.
Attach conduit to the side of the adapter from which you removed the plug (the side from
which the external cables are to be routed).
6.
Route the external cables (24 VAC, CAT 5/CAT6, alarm and/or audio as needed) through
the conduit and into the surface mount adapter.
RJ45
24 VAC
Earth
Figure 9.3: Attach conduit, route cables
7.
Attach the mounting plate (supplied with the camera) to the surface mount adapter with
the three (3) M4 – .7 x 8 Phillips pan head machine screws (supplied with the surface
mount adapter).
Summary of Contents for Autodome IP 4000 HD
Page 1: ...AUTODOME IP 4000 HD NEZ 4112 PPCW4 NEZ 4212 PPCW4 NEZ 4112 CPCW4 en Installation Manual ...
Page 2: ......
Page 56: ......
