44
en | Installing a Junction Box (VDA-AD-JNB)
AUTODOME IP 4000 HD
2015.11 | 1.1 |
Installation Manual
Bosch Security Systems
12
Installing a Junction Box (VDA-AD-JNB)
12.1
Parts List
The junction box (VDA-AD-JNB) includes the following parts:
Quantity
Item
1
Junction box
1
Torx screwdriver
4
Screws, M4 (for the innermost set of holes on the front cover)
4
Screws and washers, M6 (to mount the box to a wall)
4
Screws and washers, M8 (for the middle set of holes on the front cover)
4
Screws, M10 (for the middle set of holes on the back cover)
1
3/4 x 260 in. Roll Teflon Tape
1
5g Container Silicon Grease
1
Installation Manual
12.2
Installation Requirements
–
The wall is thick enough to install the mounting screws.
12.3
Preparing for Installation
4
Determine a secure location for the junction box. Ensure there is an adequate opening in
the mounting surface for the cables to pass through.
4
Loosen the front cover screws with the supplied Torx screwdriver.
1
2
3
4
M25
M25
G 3/4
G 3/4
Figure 12.1: Loosen front cover screws
4
To mount the junction box directly to a wall, use the outermost set of holes on the back
of the junction box as a template to mark the location on the wall to drill holes for the
four mounting screws (supplied).
4
Drill the holes.
Summary of Contents for Autodome IP 4000 HD
Page 1: ...AUTODOME IP 4000 HD NEZ 4112 PPCW4 NEZ 4212 PPCW4 NEZ 4112 CPCW4 en Installation Manual ...
Page 2: ......
Page 56: ......
