Bosch Autodome Inteox 7000i-2MP, Installation Manual

Page: 12 / 44

12 en | Unpacking AUTODOME inteox 7000i - 2MP (in-ceiling)
2021-08 | 1.4 |
Installation Manual
Bosch Security Systems
2 Unpacking
– This equipment should be unpacked and handled with care. Check the exterior of the
packaging for visible damage. If an item appears to have been damaged in shipment,
notify the shipper immediately.
– Verify that all the parts listed in the Parts List below are included. If any items are
missing, notify your Sales or Customer Service Representative from Bosch Security
Systems.
– Do not use this product if any component appears to be damaged. Please contact Bosch
Security Systems in the event of damaged goods.
– The original packing carton (if undamaged) is the safest container in which to transport
the unit and must be used if returning the unit for service. Save it for possible future use.
2.1 Parts List
Quantity Component
1 AUTODOME inteox 7000i in-ceiling camera
1 Interface box
1 Optional black trim ring
1 Ceiling gasket (for IP54 conformance)
1 Safety instructions
1 Quick Installation Guide
2.2 Tools Required
1 Appropriate tool for
cutting a hole in drywall
or ceiling tile In-ceiling Mount No
1 Pliers In-ceiling Mount No
The following table lists additional products, sold separately by Bosch or other manufacturers,
necessary to install AUTODOME cameras.
Quantity Product Part Number Size
1 SD card (user-supplied)
--- Water tight metal conduit (user-supplied) 20 mm (0.75 in.)
-- UL-listed liquid tight strain reliefs (user-supplied)
-- Weatherproof sealant (user-supplied)
4 Studs, stainless steel, corrosion-
resistant, (user-supplied) 6.4 mm (0.25 in.)
to 8 mm (5/16 in.)