AUTODOME inteox 7000i - 2MP (in-ceiling)
Safety EN | en
7
Bosch Security Systems
Installation Manual
2021-08 | 1.4 |
!
Warning!
THE CAMERA MUST BE MOUNTED DIRECTLY AND PERMANENTLY TO A NON-COMBUSTIBLE
SURFACE.
i
Notice!
Always use a shielded twisted pair (STP) connection cable and a shielded RJ45 network cable
connector where the camera is used outdoors or the network cable is routed outdoors.
Always use shielded cables/connectors in demanding indoor electrical environments where
the network cable is located in parallel with electrical mains supply cables, or where large
inductive loads such as motors or contactors are near the camera or its cable.
i
Notice!
Bosch recommends the use of surge/lightning protection devices (sourced locally) to protect
network and power cables and the camera installation site. Refer to NFPA 780, Class 1 & 2,
UL96A, or the equivalent code appropriate for your country/region, and to local building
codes. Refer also to the installation instructions of each device (surge protector where the
cable enters the building, midspan, and camera).
If a power adapter supplies power to the camera, you must ground the adapter properly.
Summary of Contents for Autodome Inteox 7000i-2MP
Page 1: ...AUTODOME inteox 7000i 2MP in ceiling en Installation Manual ...
Page 2: ......
Page 43: ......
