18
en | Installation
IP Camera 200 Series
AR18-09-B003 | v1.1 | 2010.05
Installation and Operation Manual
Bosch Security Systems
3.4
Audio connectors
Figure 3.4
Audio connectors
Connect audio devices to the
Line In
and
Line Out
connectors.
3.5
Resetting the camera
If the camera cannot be connected because the IP address has
changed, press and hold the reset button (7 seconds
approximately) until the LED flashes (red) to recall the factory
default values. The factory default IP address is 192.168.0.1
Figure 3.5
Reset button
1 2 3 4
DC12V
Etherne
t
Line-out
Rese
t
Line-in
I/O
Line - R
GND
Line - L
Line in: 9 kOhm typ., 200 mVrms
Line out: 16 Ohm min. 200 mVrms
1 2 3 4
DC12V
Etherne
t
Line-out
Rese
t
Line-in
I/O
