84
en | Operation via the browser
IP Camera 200 Series
AR18-09-B003 | v1.1 | 2010.05
Installation and Operation Manual
Bosch Security Systems
sequences are recorded at the resolution specified in the
encoder configuration. The storage location depends on the
configuration of the camera.
1.
Click the recording icon
to record video sequences.
–
Saving begins immediately. The red dot on the icon
indicates that a recording is in progress.
2.
Click the recording icon again to stop recording.
Play back saved video sequences using the Player from
Bosch Security Systems.
7.1.7
Running recording program
The hard drive icon below the camera images on the
Livepage
changes during an automatic recording.
The icon lights up and displays a moving graphic
to
indicate a running recording. If no recording is taking place, a
static icon is displayed.
7.1.8
Audio communication
Audio can be sent and received via the
Livepage
if the active
monitor and the remote station of the camera support audio.
1.
Press and hold the F12 key to send an audio signal to the
camera.
2.
Release the key to stop sending audio.
All connected users receive audio signals sent from the camera
but only the user who first pressed the F12 key can send audio
signals; others must wait for the first user to release the key.
