Bosch 200 Series NBC-255-P Installation And Operation Manual Download

Page: 52 / 94

en | Advanced Mode

IP Camera 200 Series

AR18-09-B003 | v1.1 | 2010.05

Installation and Operation Manual

Bosch Security Systems

Profile names

Change the names of the recording profiles listed in the Time

periods box.

Click a profile.

Click

Rename

Enter the new name and click

Rename

again.

Activate recording

After completing configuration, activate the recording schedule

and start recording. Once activated, the

Recording Profiles

and

the

Recording Scheduler

are deactivated and the configuration

cannot be modified. Terminate recording at any time to modify

the configuration.

Click

Start

to activate the recording schedule.

Click

Stop

to deactivate the recording schedule.

Recordings that are currently running are interrupted and

the configuration can be modified.

Recording status

The graphic indicates the recording activity. An animated

graphic is seen when recording is taking place.

6.5.5

Recording Status

Details of the recording status are displayed here for

information. These settings cannot be changed.

Summary of Contents for 200 Series NBC-255-P































































































Search results

Summary of Contents for 200 Series NBC-255-P

Reviews:

Related manuals for 200 Series NBC-255-P

Brands by name

Popular brands

Bosch 200 Series NBC-255-P, Installation And Operation Manual

Search results

Summary of Contents for 200 Series NBC-255-P

Reviews:

Related manuals for 200 Series NBC-255-P

Brands by name

Popular brands