background image

16992000121

2014-11-07

Robert Bosch GmbH

Product Description  |  MTS 6513 VCI  |  5

en

en

The following table lists the three different MTS 6513 
kit configurations:

Kit

Part Number

Configuration

Non-Wireless

1699200115

MTS 6513 VCI assembly 

without a Wi-Fi adapter

Wireless-Infra-

structure-Mode

1699200116

MTS 6513 VCI assembly 

with a Wi-Fi adapter

Wireless-Point-to-

Point

1699200117

MTS 6513 VCI assembly 

with a Wi-Fi adapter and 

a Wireless 802.11n USB 

Module

Components common to all three kit configurations are 
listed in the following table.

Kit Component

Part Number

Qty

USB mini "A" to USB mini "B" Cable - 

(3 meters)

F-00K-108-988

1

J1962 Data Link Connector Cable 

(16/26 Pin) (1 meter)

F-00K-108-761

1

MTS 6513 - VCI Manager Software and 

Documentation CD

1699200118

1

Velcro Cable Tie Wrap - 3/4'' x 5"

1699200050

1

Replacement parts and optional accessories for the 
MTS 6513 are listed in the following table.

Item

Part Number

Bosch Branded Storage Case

F-00K-108-939

End Cap Assembly

F-00K-108-945

USB, Wireless 802.11n, D-Link DWA-131 

E1

1699200155

J1962 Data Link Connector Cable

(16/26 Pin), 1 meter

F-00K-108-761

USB mini "B to USB mini "A", 1.8 meters 

(right angle)

F-00K-108-988

Velcro Cable Tie Wrap - 3/4'' x 5''

1699200050

Using the VCI Manager PC application software, you 
configure the MTS 6513 to communicate with a host 
computer. The MTS 6513 is capable of communicating 
over a USB cable or wireless (WLAN).

The MTS 6513 has a LCD display which can be used to 
run applications in stand alone mode without a PC.

4.2 

User group

The product may be used by skilled personnel only. 
Personnel scheduled to be trained, familiarized, inst-
ructed or to take part in a general training course may 
only work with the product under the supervision of an 
experienced person.

4.3 

PC System Requirements

The MTS 6513 VCI Manager Software runs on a Windows 
based PC/Laptop. 

The following table lists the minimum PC/laptop requi-
rements for installing and running the MTS 6513 VCI 
Software:

Item

System requirements

Operating System

WIN XP/WIN Vista/WIN 7/WIN 

8/WIN 8.1 (32 bit and 64 bit 

PCs)/WIN 10

Available hard disk space

100 MB or greater

RAM

512 MB or greater

CPU

1 GHZ or higher

Communication Ports

1 USB

Video Resolution

1024 x 768 or higher

4.4 

MTS 6513 Kit Contents

The MTS 6513 Base Kit includes cables and hardware 
needed to transfer data and reprogram ECUs on vehicles 
through the DLC connector.

The image below shows a MTS 6513 VCI kit with wireless 
infrastructure mode (P/N 1699200116).

Summary of Contents for 1699200115















Reviews: