background image

16992000121

2014-11-07

Robert Bosch GmbH

4  |  MTS 6513 VCI  |  Product Description

en

en

CAUTION – Battery Clamps - Polarity

Possible risk of personal injury

 

Do not clasp battery clamps together 
when connected simultaneously to the 
vehicle's 12 volt cigarette lighter or power 
supply. Reverse polarity in the vehicle's 
cigarette lighter may be present. Damage 
could occur to the VCI or to the vehicle. 
Make sure all cables and adapters are 
firmly connected before starting to use 
the VCI Always read the instructions com-
pletely before attempting a new procedu-
re. 

3.1 

Electromagnetic Compatibility

The MTS 6513 satisfies the requirements of the EMC 
directive 2004/108/EG.

 

i

The MTS 6513 is a class/category A product as 
defined by EN 55 022. The MTS 6513 may cause 
high-frequency household interference (radio inter-
ference) so that interference suppression may be 
necessary. In such cases the user may be required to 
take the appropriate action.

3.2 

Disposal

This MTS 6513 is subject to European guidelines 
2002/96/EG (WEEE). Old electrical and electronic 
devices, including cables and accessories or batteries 
must be disposed of separately from normal household 
waste. Please use the return and collection systems in 
place for disposal in your area.

Damage to the environment and hazards to personal 
health are prevented by properly disposing of the MTS 
6513.

3.3 

FCC Compliance

This equipment has been tested and found to comply 
with the limits for a Class A digital device, pursuant to 
Part 15 of the FCC rules. These limits are designed to 
provide reasonable protection against harmful interfe-
rence when the equipment is operated in a commercial 
environment.

This equipment generates, uses, and can radiate 
radio frequency energy. If not installed and used in 
accordance with the instruction manual, it may cause 
harmful interference to radio communications. Opera-
tion of this equipment in a residential area is likely to 
cause harmful interference, in which case the user will 
be required to correct the interference at his or her 
expense.

All work conducted on electrical device may be perfor-
med by a person with sufficient knowledge and experi-
ence in the field of electronics.

3.4 

WiFi Compliance

This equipment complies with the following worldwide 
wireless standards.

3.5 

Safety/Environmental Compliance

This equipment complies with the following worldwide 
safety and environmental standards.

4.  Product Description

4.1 

Overview

The MTS 6513 Vehicle Communication Interface (VCI) is 
used by professional technicians as an aid in diagnosing 
and repairing automotive electrical and electronic sys-
tems. The MTS 6513 is designed to connect the vehicle 
to a host PC computer application which then functions 
though the MTS 6513 for data transfer and Electronic 
Control Unit (ECU) reprogramming.

Summary of Contents for 1699200115















Reviews: