background image

14 | 15

OTHER

.

CLEANING

• Dry damp personal protective equipment in 

the air, not on artificial heat sources. Dry met-

al components with cloths.

• Clean soiled textile components (e.g. arrester 

harnesses and ropes) with lukewarm water 

and a little detergent for delicates. Then rinse 

carefully and allow to dry in the air. Other 

cleaning agents are not allowed!

• If disinfection is necessary, please contact the 

e-mail hotline: 

[email protected]

• If the personal protective equipment comes 

into contact with salt-water, keep it wet until 

it can be rinsed with plenty of distilled water.

LIFE SPAN

The following recommendation applies for the 

use of the BOOT:

Maximum usage period after being used for 

the first time: 

8 years

In ideal storage conditions and annual inspec-

tions, the product may be stored for up to 

3 more years before it is used for the first time 

without impacting on the stated maximum us-

age period. Every further year in storage reduc-

es the final maximum allowed usage period by 

1 year.

Metal parts are not subject to age-related life 

span deadlines. The expert makes a decision 

based on his technical expertise and the latest 

version of the standard.

The service life can only be prolonged by means 

of regular expert inspections and the replace-

ment of age-related worn parts (e.g. ageing of 

textile components).

For reasons of safety, intensive use and/or ex-

treme application conditions such as sharp 

edges, chemical influences, UV radiation etc. 

will reduce the usage period. The company 

owner needs to take this into account in the 

workplace risk analysis.

The company owner must ensure compliance 

with the maximum usage period by document-

ing first-time use in the test card.

The test card at the end of this user manual 

must be presented during the regular expert 

inspections and be completed with the certifi-

cate by the manufacturer or an expert briefed 

about the inspection of the device.

For more details, please visit www.bornack.de.

REPAIRS

• For reasons of liability, repairs may only be 

carried out by BORNACK or in a workshop 

 authorised in writing by BORNACK. 

• Only original spare parts from the manufac-

turer may be used.

Summary of Contents for BOOT





















Reviews: