Borg & Overstrom T1, Install & Operation Manual

Page: 27 / 42

Please note that this sanitisation fluid contains an
active caustic/alkaline agent.
Always use responsibly and with care
remembering that due to its alkaline nature
unnecessary concentrated/prolonged contact
with any materials, including metals, can cause
damage.
Always rinse all contact surfaces after use with
clean water.
Avoid skin
contact and
wear
protective
gloves
when
handling
sanitisation
fluids.
In the event
of any skin
contact,
flush
immediately
with clean,
cold water.
Pre-flush the new filter to
waste using the chilled
button until the water
appears clear and is
free of air. Flush
through a small amount
of water to check all
functions.
Emptying the CO2 Tank