Borg & Overstrom T1, Install & Operation Manual

Page: 17 / 42

Identify a suitable location for the ProCore unit. It should be positioned within 1.0m of the faucet, and within
2.0m of suitable services connections. Allow enough space to fit the ventilation ducting system.
The ProCore unit must be installed in accordance with the relevant requirements of:
The appropriate building regulations by application of either The Building Regulations (England and Wales),
The Building Regulations (Scotland) or The Building Regulations (Northern Ireland). In territories other than
those listed the local regulations in force must be complied with.
The Water Supply (Water Fittings) Regulations (England, Wales and Northern Ireland) or The Water
Byelaws in Scotland.
The unit must not be installed where it is liable to freeze. If the unit is thought to be frozen it must not be
switched on. It should be allowed to thaw and must then be thoroughly inspected to ensure it is
undamaged.
Service Requirements
Water: Mains potable water – internally regulated to 0.3MPa (3 bar)
CO2: Food Grade CO2 to be supplied
Min mains pressure 0.05MPa (0.5 bar)
Electricity: 13A supply – Earth Leakage Protected
Waste Drain Connection