２
3. Auto Tuning before use
We would recommend Auto Tuning before use, although each parameter is
set in the standard value at the shipment. By doing so, soldering irons will
ensure optimum performance according to iron tip temperature, shape of
iron tip, working environments and so on.
※
This function will be set automatically by keypad. (ilease refer to i.8)
4. Notes for installation and use
This machine is designed with earth specification. Make sure to use an
earth equipped receptacle. If you do not have such receptacle, install an
earth separately.
Use this machine on a neat bench covered with a conducive mat.
Keep away from too much moisture, direct sunshine, dust, vibration
and flammable objects.
In order to prevent static electricity, use a static electricity removal
device, wrist strap and so on.
Odor is generated due to the use of solder and flux. Be sure to ventilate
work places.
Be sure to pull out the power plug when the machine is not used.
Be sure to grab the power plug instead of the cord when plugging and
unplugging.
When change power voltage from 100V to 220V for example, make sure
to confirm the specifications of the controller parts before use.
Do not use this machine for purpose other than the original purpose.
