６
⑤
「
」
blinks at the display. iress
「◎」
key again, and the buzzer starts to
beep 5 times to return to the operation mode.
※
If you happen to enter unsuitable temperature, which is out of the setting range,
the controller does not recognize it, and the previous set temperature is indicated
with buzzer sounds. Start above procedure again from the beginning.
※
ATTENTION
When you change the SET IRON TIi TEMiERATURE , be sure to confirm
「
」
at the display, then press
「◎」
key to complete the setting.
7-(B): Confirmation of the SET IRON TIi TEMiERATURE
①
Keep pressing
「△」
key for more than 3 seconds, and the display shows the SET
IRON TIi TEMiERATURE.
In order to distinguish from the iron tip temperature, the SET IRON TIi
TEMiERATURE is indicated together with
“
.
”
(e.g. 3
.
5
.
0
.
)
②
When you release
「△」
key
,
the display shows
the iron tip temperature again.
7-(C): Soldering tip temperature compensation
Default: 0
℃
Setting rage:
ｰ
99 ~ 99
℃
Whenever change soldering iron tips, we need to compensate for them.
Example 1)
Indicated temperature (by a controller) : 350
℃
Measured temperature (by a thermometer) : 336
℃
「
350
℃」－「
336
℃」＝「
14
℃」⇒
Compensate value:
「␣１４」
