４
5-(C)
：
How to assemble
①
Make sure that the power voltage of the unit and the power source is the same.
②
Make sure that the power switch is OFF.
③
Connect the power cord into the power inlet at the rear face.
④
Connect the soldering iron cord into the connector socket at the front face.
⑤
Assemble the iron stand (BON-14), and rest the soldering iron in its holder.
6. How to use
6-(A): OiERATION mode
①
Turn on the power switch.
②
「
」
is instantly indicated at the display. When the iron tip temperature is
under 45
℃
,
「
」
is indicated. When it exceeds 45
℃
, the iron tip temperature is
indicated
③
When the iron tip temperature approaches around under 5
℃
from the SET IRON
TIi TEMiERATURE and it becomes stable, the buzzer beeps 3 times.
※
ATTENTION:
Make sure to start soldering after confirming the iron tip temperature stability and
the beep sounds to prevent the soldering defects.
③
②
④
