２
4. Notes for installation and use
This machine is designed with earth specification. Make sure to use an earth
equipped receptacle. If you do not have such receptacle, install an earth
separately.
Use this machine on a neat bench on which a conducive mat is put.
Do not place where the machine would be exposed too much moisture, direct
sunshine, much dust and vibration.
In order to prevent static electricity, we recommend that you use a static
electricity removal device, wrist strap etc.
Odor is generated due to the use of solder and flux. Be sure to ventilate work
places. e.g. Install a ventilation fan etc.
Be sure to pull out the power plug when the machine is not used.
Be sure to grab the power plug instead of the cord, when plugging and
unplugging.
When change power voltage from 100V to 220V for example, make sure to
confirm the specifications of the soldering iron before use.
Please keep flammable objects away from this machine.
Be sure to check the slack of each screw and tighten them securely before use
this machine.
Do not use this machine for purpose other than the original purpose.
