５
5-D
：
How to use
①
Turn on power
Insert the power plug into the receptacle. Confirm each input voltage of the soldering iron and
the controller is the same, then turn on the power.
※
Do not use a 100V soldering iron with 220V power source. Failure to do so may damage the
heater.
②
Setting and confirmation of the sensor type
M12 Controller is workable for 2 different kinds of soldering iron, one is type J sensor and the
other type K sensor. Please make sure that the each sensor type of the soldering iron and that of
the controller should be the same. Otherwise temperature control is unable to work.
※
The sensor type of controller and soldering iron is adjusted the same at the shipment.
The sensor type of controller itself is type K at the shipment.
②
-1 How to confirm the sensor type.
Controller part
At the operation mode,
SV display as show below.
Check the sensor type of the controller whether it is the same as that of a connected
soldering iron.
《
Type K
》 《
Type J
》
Soldering iron
There are 2 different kinds of sensor type, which are type J and type K.
Please check the label of the soldering iron.
Type J soldering iron has a capital letter “J” as below.
TYPE K soldering iron
TYPE J soldering iron
