bonitron Legacy M3534R-RY Customer Reference Manual Download Page 28

Page: 28 / 56

M3534R 40&85A

4.2.2.2. ASB

3534I3

NTERFACE

OARD

Figure 4-2: ASB 3534I3 Interface Board Features

3534I3

NTERFACE

OARD

UMPER

The 3534I3 interface card isolates the front panel from the drive system
voltage, and provides an output for remote monitoring of Ready and
Active signals. Jumpers select the contact of each opto FET relay device.

J1:

Selects N.O. or N.C. contact for the Ride-Thru Ready (RTR) signal.

With J1 in the “N.O.” position the contact will be made while the module
is “READY”.

J2:

Selects N.O. or N.C. contact for the Ride-Thru Active (RTA) signal.

With J2 in the “N.O.” position the contact will be made while the module
is “ACTIVE”.

: Selects N.O. or N.C. contact for the disable (DIS) signal. With J3 in

the “N.O.” position the boost module will be disabled if there is 15-24VDC
on the disable input terminals.

TB4

: The TB4 connector provides a field connection point for Disable,

Ready and Active signals. Signals are isolated up to 3000V.



Ready

– available on TB4- 3 (J1 post) and -4 (common)



350VDC,120mA max



Active - available on TB4-1 (J2 post) and -2 (common)



350VDC, 120mA max



Disable - Input on TB4 terminal 5 (neg DC) and terminal 6 (pos DC)



15-28VDC, (20mA at 28VDC)

4.2.3. R

EMOTE OR

ABINET

OOR

YSTEM

TATUS

ISPLAY AND

EST

ODULE

The Ride-Thru Diagnostic Display Panel provides visual indication of the
Ride-

Thru module’s operating status..

The monitored functions include

POWER

RIDE-THRU

ACTIVE,

RIDE-

THRU

READY,

and

OVERTEMP

. In addition, this panel provides the system

Disa

ble

RTA

RTR

TB4

TB5

Summary of Contents for Legacy M3534R-RY

























































Search results

Summary of Contents for Legacy M3534R-RY

Reviews:

Related manuals for Legacy M3534R-RY

Brands by name

Popular brands

bonitron Legacy M3534R-RY, Customer Reference Manual

Search results

Summary of Contents for Legacy M3534R-RY

Reviews:

Related manuals for Legacy M3534R-RY

Brands by name

Popular brands