AHD 1200 Embedded PC
Errors
V1
37
In Case of Error:
As a rule:
1.
Determine the cause of the error.
2.
Immediately inform a responsible party on-site.
3.
Depending on the error type, have an authorized specialist
correct it, or correct it on your own.
4.
Correct the error by replacing or repairing the defective parts
(e.g. cables, plugs, etc.).
5.
If the error cannot be determined through the error table, a
device defect cannot be excluded. For repairs, send the device
to the manufacturer’s address or to an authorized specialist
company.
9.2 Error Correction
Error
Possible Cause
Diagnosis/Error Correction
No visualization shown
Power supply failure
Test the power supply
No connection to video source
Test the connection to the video source
No connection to the display
Test the connection to the display
Incorrect data processing and
visualization of external data,
although the device and sys-
tem are connected to the
power supply and to each
other
Device defect
Contact the manufacturer or an autho-
rized representative, if the device does
not function properly in spite of all meas-
ures taken.
Device integrated in the sys-
tem configuration is not visua-
lized.
Device failure
Test the device functionality according to
its documentation.
Connection to the device has
failed
Test the device connection
The configuration does not
intend for the device to be vi-
sualized on the display used.
Choose a display on which the device is
visualized according to the system confi-
guration.
