AHD 1200 Embedded PC
Installation and Initial Startup
V1
31
6.2.4 Updating the Firmware
TIP!
Generally, this step is not necessary with factory
side configured devices.
In some cases, the device firmware must be updated prior to start-
ing up the device. For this, contact the manufacturer for further in-
formation.
6.2.5 Transferring the Configuration
TIP!
With factory side configured devices, this step is
only necessary for subsequent changes of the sys-
tem or visualization configuration.
For more information about transferring the system
configuration, consult the device’s configuration
instructions. If you need to transfer the visualization
configuration, contact the manufacturer.
