AHD 1200 Embedded PC
Installation and Initial Startup
V1
27
TIP!
On delivery, the AHD 1200 is configured as speci-
fied in the project configuration.
This includes the integration of the ship’s devices
captured by the AHD 1200, the data processing, and
the graphic rendering of ship data and control ele-
ments on the displays.
When changing the project specific configuration, the
device may need to be reconfigured locally by trained
personnel.
For this, please contact the manufacturer or an autho-
rized representative.
CAUTION!
Equipment damage from incorrect cable con-
nections!
Improperly connected cables can cause system
errors and equipment damage.
Therefore:
– Always verify cable and wire designations be-
fore connecting them. Check for secure seating
of the connecting wires in the terminals.
– To avoid short circuits, verify that all wires are
connected in the terminal.
– To not over tighten the terminal clamps.
– When using pluggable terminal strips or plug
connectors, it is imperative to ensure insertion
in the correct socket and secure seating.
3.
Test the system for earth/ground fault.
CAUTION!
System failure or malfunction!
During earth/ground fault, incorrect data can be
transmitted and lead to overall system failure or
malfunctions.
Therefore:
– Immediately correct any discovered
earth/ground fault.
