Bongshin BS-8300, Operational Manual

Page: 4 / 45

3
&"G5:HM7CB8=H=CBG
Please keep the following using conditions certainly
■ EARTH
To avoid an electric error such as a noises in your production line
It should be earthed before installation certainly.
Specially it will be safety to divide the power of Indicator into a load cell.
■ SAFTY CONDITIONS
Don
’
t use it closed to a explosive gas and an inflammable dust
environments
■ POWER
Use the power under 110/220V 50/60HZ ±10% and divide it into the
power line
■ TEMPERTURE CONDITIONS
Operating Temperature : -10
o
C ∼ +40
o
C ( +14
o
to 104
o
F )
Custody Temperature : -40
o
C ∼ +80
o
C ( -40
o
to 176
o
F )
■ INSTALLATION LOAD CELL
- Available to use the same load cell of 6pcs ( 350Ω standard )
- A ground should be installed horizontal
- Installing over 2pcs of load cell, please connect each line in parallel
and Insert a variable resistor under 50Ω in EX + line and minimize a output
Accuracy of load cell.
It may occur a weight error by each accuracy of load cell.
- It may occur a weight error in case of a temperature variation of load cell
- Please weld(elect spark) at the place installed with load cell and equipments,
Divide the power into a connector of load cell in inevitable case
- Please connect the below construction of load cell with the above ones using
The earth to the weighing part weighing a material occurring a electro sparks.