BONFIGLIOLI Profinet DGM Series, Operating Manual

Page: 38 / 42

Accessing data via PROFINET
40 Operating manual for PROFINET fieldbus | DOC01725815-0003 | 2016-12 | V2.04 EN
Continuation
PROFINET DGM parameter
Slot Index Parameter Number* Accepted
Name in
German
Minimum Maximum Unit
2 132 388 33.015 1: Ready R optimisation 0 200 %
2 147 403 33.016 1: Ready
Motor phase
monitoring
0 1
2 70 326 33.031 1: Ready Motor current 0 150 A
2 71 327 33.032 1: Ready Motor rating 50 55000 W
2 73 329 33.034 1: Ready Motor speed 0 80000 rpm
2 74 330 33.035 1: Ready Motor frequency 10 400 Hz
2 115 371 33.050 1: Ready Stator resistance 0 100 Ohm
2 117 373 33.105 1: Ready
Scatter
inductivity
0 1 H
2 68 324 33.110 1: Ready Motor voltage 0 1500 V
2 72 328 33.111 1: Ready Motor cos phi 0.5 1
2 125 381 33.138 2: Always
Holding current
time
0 3600 s
2 116 372 33.200 1: Ready Stator induc. 0 1 H
2 129 385 33.201 1: Ready Nominal flux 0 10000 mVs
2 111 367 34.010 1: Ready Control method 100 299
2 85 341 34.011 1: Ready Type of encoder 0 2 1
2 86 342 34.012 1: Ready
Encoder line
count
0 10000 1
2 87 343 34.013 2: Always Encoder offset -360 360 °
2 131 387 34.020 2: Always Flying restart 0 1
2 130 386 34.021 2: Always Catch time 0 10000 ms
2 8 264 34.030 2: Always
Switching
frequency
1 4
2 121 377 34.090 2: Always
Speed controller
Kp
1 10000
mA/rad
/s
2 122 378 34.091 2: Always
Speed controller
Tn
0 10 s
2 113 369 34.110 2: Always Slip trimmer 0 1.5
Continues next page