BONFIGLIOLI Profinet DGM Series, Operating Manual

Page: 22 / 42

Accessing data via PROFINET
24 Operating manual for PROFINET fieldbus | DOC01725815-0003 | 2016-12 | V2.04 EN
Continuation
Consec.
no.
Data
type
Available
in SW
version
Designation Unit Description
9 REAL Incremental encoder speed Hz only with encoder option
10 t.b.d. Incremental encoder position only with encoder option
11
DWOR
D
*
Application error 1 Bit-coded
13
DWOR
D
Power error 1 Bit-coded
15
DWOR
D
Digital inputs 1
Bit 0 = Dig. In 1
Bit 1 = Dig. In 2
Bit 2 = Dig. In 3
Bit 3 = Dig. In 4
Bit 4 = EN-HW / STO
16 REAL Analogue In 1 V Analogue input 1 application
17 REAL Analogue In 2 V Analogue input 2 application
18 REAL F_target ramp Hz
Frequency target value behind
ramp
19 REAL F_target Hz
Frequency target value of
target value source
20 REAL PID actual value %
Actual value of PID process
controller
21 REAL PID target value %
Target value of
PID process controller
22 REAL Analogue Out 1 V Analogue Out 1
23 REAL Intermediate circuit power W Intermediate circuit power
24 REAL Reserved - Reserved
25 REAL Reserved - Reserved
26 REAL Reserved - Reserved
27 REAL Reserved - Reserved
28 REAL Reserved - Reserved
29
DWOR
D
BUS/Soft PLC status word 1 BUS/Soft PLC status word
30 REAL 03.02 Rotation speed rpm Motor shaft speed
31 REAL 03.02 Torque Nm Torque
32 REAL 03.02 Electric motor rating W Electric motor rating
33
DWOR
D
03.04 Virtual DigOuts (lowWord) 1 Virtual DigOuts of the soft PLC
35 REAL 03.04 Customer-specific output variable 1 1
Customer-specific soft PLC
output variable
36 REAL 03.04 Customer-specific output variable 2 1
Customer-specific soft PLC
output variable
Continues next page