BONFIGLIOLI ACTIVE ACT2 Series, Quick Start Manual

Page: 82 / 258

80
Quick Start Guide ACT
12/20
GB
• Use the ENT key to switch to the CTRL sub-menu.
• In the CTRL sub-menu, select the menu item “SetUP”
and confirm by pressing the ENT key.
• Use the ENT button to select parameter
Configuration
30.
• Use the arrow keys to enter the number
110
or
410
.
110: sensor-less control acc. to U/f characteristic
410: sensor-less, field-oriented control
•
Press the ENT key to confirm this message and in
order to continue the commissioning procedure.
If the setup was changed, “SEtUP” will be displayed again.
•
Press the ENT key to confirm this message and in order to continue the
commissioning procedure.
• After initialization, confirm the selected configuration by pressing the ENT
key.
•
Select the connected machine via parameter
Motor type
369.
Operation Mode Function
0 - Unknown The motor is not a standard type.
1 - Asynchronous
Three-phase asynchronous motor,
squirrel cage
2 - Synchronous Three-phase synchronous motor
3 - Reluctance Three-phase reluctance motor
10 - Transformer
Transformer with three primary
windings
• Enter the motor data indicated on the rating plate in the following
parameters.
ENT
ENT
NOTICE
Device damage possible
If the motor type is not entered correctly, the drive may be
damaged.
•
Observe the correct motor type.