GSS2520JA
Owner’s Manual
11
BB
M4 x 10 bolt
2 PCS
EE
M4 Flat Washer
2 PCS
Step13 (Install the grease pan and Heat Insulator)
a) Loose the three pre-installed bolts on grease pan
(V) and allow 1/4 bolt’s length extend out of grease
pan.
b) Insert the holes on the heat insulator (U) into the
pre-attached bolts and push the heat insulator back
until in its on place.
c) Tighten all the bolts using the screwdriver provided.
Step14 (Install the grease pan stopper)
a) Insert the grease pan and heat insulator assembly into
the grill body from back side.
b) Align the holes on the grease pan stopper (W) with the
hole on the back side of firebox.
c) Insert one M4 x 10 bolt (BB) and M4 flat washer (EE)
into each pre-drilled hole.
d) Tighten the bolts using the screwdriver provided.
Step15 (Install the grease cup and grease cup support)
a) Hook the grease cup support (R) into the grooves
beneath the grease pan.
b) Put the grease cup (S) onto the grease cup support.
