GSS2520JA
Owner’s Manual
10
BB
M4 x 10 bolt
2 PCS
EE
M4 Flat Washer
2 PCS
BB
M4 x 10 Bolt
4 PCS
EE
M4 Flat Washer
4 PCS
FF
M4 Lock Washer
4 PCS
GG
M4 Nut
4 PCS
Step 11 (Install the side burner)
a) Open the right side burner lid and place the side
burner (N) on the right side shelf. Make sure the side
ignition line connects well with the valve.
b) Align the holes on the side burner (N) with the holes
on the right shelf.
c) Insert one M4 x 10 bolt (BB) into each of the
pre-drilled holes of the side burner (N).
d) Insert one M4 flat washer (EE), M4 lock washer (FF)
and M4 nut (GG) into each lower side of bolt (BB).
e) Go back to tighten all the bolts using the screwdriver
provided.
f) Connecting ignition line with the electrode.
Step 10 (Install the valve with side knob and knob seat)
a) Align the holes on the side knob seat (M) with the
hole on the front of the right side shelf and side burner
valve. Insert one M4 x 10 bolt (BB) and one M4 Flat
washer (EE) into the pre-drilled holes.
b) Tighten all the bolts using the screwdriver provided
c) Press the knob (L) onto the valve shaft.
Step12 (install the heating plates, cooking grids and
warming rack)
a) Place the heating plates (O) upon each burner.
b) Put the cooking grids (P) upon the heating plates.
c) Put the warming rack (Q) on the side walls of
firebox.
