Section 06
FUEL SYSTEM
Subsection 04
(CARBURETOR)
LMR2000_060_06_04A.FM
06-04-3
Unscrew idle adjustment screw
no. 2
to obtain a
small gap between stopper and screw.
1. Idle speed screw
Ensure throttle plates are completely closed on
both carburetors.
Loosen jam nut and turn adjustment nut to elimi-
nate all the slack in the throttle cable between sen-
sor and carburetor.
Tighten jam nut.
1. Throttle cable
2. Adjustment nut
3. Jam nut
Turn idle adjustment screw
no. 2
clockwise until it
comes in contact with stopper.
Adjust as follows.
Adjust oil pump cable. Refer to OIL INJECTION
PUMP.
NOTE:
It is important to adjust oil pump cable prior
to finalize adjustment of throttle cable.
CAUTION:
Improper oil injection pump syn-
chronization with carburetor throttle opening
can cause serious engine damage.
Adjust throttle cable to obtain proper lever position
at full throttle.
Turn adjuster knob as required to obtain proper
throttle lever adjustment.
1. Jam nut
2. adjustment nut
3. Throttle cable
Low Speed Screw
1. Low speed screw (PTO side shown)
CAUTION:
Do not attempt to set engine idle
speed with low-speed screw.
MODEL
IDLE SCREW ADJUSMENT
Sportster LE
1/2 turn
F06F0KA
1
F02F20A
1
2
3
1
F02F21A
2
3
F06F0HA
1
Summary of Contents for Sea-Doo SPORTSTER LE
Page 1: ...219 100 097...
Page 122: ......
