Section 04
ENGINE
Subsection 06
(BOTTOM END)
04-06-8
LMR2000_054_04_06A.FM
Connecting Rod Big End Axial Play
Using a feeler gauge, measure distance between
thrust washer and crankshaft counterweight.
1. Measuring big end axial play
2. Feeler gauge
Stator Drive Bearing
Check bearing
no. 21
of starter drive assembly in
crankcase.
1. Bearing of starter drive assembly
Reed Valve
Check reed valve petals
no. 22
for cracks or other
defects. The reed petals must lie completely flat
against the reed valve body
no. 23
. To check, hold
against light.
1. No play
In case of a play, turn reed petals upside down and
recheck. If there is still a play, replace petals.
Check perfect condition of rubber coating on reed
valve body.
Check stopper distance from center of reed valve
block.
A. 13 ± 0.25 mm (.512 ± .010 in)
NOTE:
Distance should be the same on both sides.
Bent stopper as required to obtain the proper dis-
tance.
CONNECTING ROD BIG END AXIAL PLAY
MODEL
NEW PARTS
WEAR
LIMIT
(min.)
(max.)
947 engine
0.390 mm
(.015 in)
0.737 mm
(.029 in)
1.2 mm
(.047 in)
F01D1WA
1
2
F06D1IA
1
F06D1JA
1
F06D1EA
A
Summary of Contents for Sea-Doo SPORTSTER LE
Page 1: ...219 100 097...
Page 122: ......
