BOMBARDIER Quest Max 2004, Operator'S Manual

Page: 139 / 172

137
Check pressure when tires are “cold”
before using the vehicle. Tire pressure
changes with temperature and alti-
tude. Recheck pressure if one of these
conditions has changed.
For your convenience, a pressure gauge
is supplied in tool box.
Although the tires are specifically de-
signed for off-road use, a flat may still
occur. Therefore, it is recommended
to carry a tire pump and a repair kit.
Tire/Wheel Condition
Check tire for damage and wear. Re-
place if necessary.
Do not make a tire rotation. The front
and rear tires have a different size. The
tires are directional and their rotation
must be kept in a specific direction for
proper operation.
Wheel Removal
Loosen nuts then lift vehicle. Place a
support under vehicle. Remove nuts
then remove wheel.
At installation, it is recommended to
apply anti-seize lubricant on threads.
Gently tighten nuts in a criss-cross se-
quence then apply a final torque of
75 N•m (55 lbf•ft).
1. Taper side of nut
CAUTION: Always use the recom-
mended wheel nuts (P/N 705 400 013).
Using a different nut could cause dam-
ages to the rim.
Steering System
Quest MAX and Traxter MAX Series
Throttle Cable Lubrication
The throttle cable must be lubricated
with Bombardier cable lubricant (P/N
293 600 041) or an equivalent.
TIRE PRESSURE
QUEST MAX SERIES
UP TO
272 KG
(600 LB)
MAX.
FRONT REAR
48 kPa
(7 PSI)
48 kPa
(7 PSI)
MIN.
35 kPa
(5 PSI)
35 kPa
(5 PSI)
TRAXTER MAX SERIES
UP TO
290 KG
(640 LB)
MAX.
FRONT REAR
48 kPa
(7 PSI)
48 kPa
(7 PSI)
MIN.
35 kPa
(5 PSI)
35 kPa
(5 PSI)

WARNING
Using another lubricant could
cause the throttle lever/cable
sticking or stiffness.
V01A08Y
1
vmo2004_011b_5_maintenance.fm Page 137 Wednesday, May 21, 2003 1:57 PM