BOMBARDIER Quest Max 2004, Operator'S Manual

Page: 133 / 172

131
CAUTION: Be careful not to damage
the radiator fins when cleaning. Do
not use any object/tool that could
damage the fins. The fins are pur-
posely thin parts to allow efficient
cooling. WHEN HOSING, USE LOW
PRESSURE ONLY. NEVER USE A
HIGH PRESSURE WASHER.
Properly reinstall access plug and seat.
Carburetor
Quest MAX and Traxter MAX Series
See an authorized Bombardier ATV
dealer each year to verify and clean the
fuel system.
Air Intake System
Quest MAX and Traxter MAX Series
Air Filter Cleaning/Draining
Periodically inspect air filter box drain
tube for liquid or deposits.
TYPICAL
1. Air filter box
2. Drain tube
3. Clamp
NOTE: If vehicle is used in dusty area,
inspect more frequently than specified
in MAINTENANCE CHART.
If liquid/deposits are found, squeeze and
remove the clamp. Pull drain tube out
and empty it.
CAUTION: Do not start engine when
liquid/deposits are found in the drain
tube.
When liquid/deposits are found, the air
filter must be inspected/dried/replaced
depending on its condition.
Remove air filter as explained below.
Air Filter Removal
CAUTION: Never remove or modify
any component in the air box. Other-
wise, engine performance degrada-
tion or damage can occur. The engine
carburation is calibrated to operate
specifically with these components.
Remove seat.
Release clamps and remove air filter
box cover.
TYPICAL
1. Release clamps
2. Lift to remove
Loosen clamp and remove air filter.
1. Clamp
2. Air filter
V04C16Y
1 3 2
V01F05Y
1
2
1
V01F1LY
2
vmo2004_011a.book Page 131 Thursday, May 15, 2003 1:46 PM