BOMBARDIER outlander max 650 efi 2006, Operator'S Manual

Page: 94 / 145

V07I0DY
4WD MODE
To deselect the 4WD mode, press the
selector on 2WD.
V07I0EY
2WD MODE
When the selector is located on the
2WD, the vehicle is in 2 wheel drive
at all time.
Winch Operation
XT Models
See the ATV WINCH OPERATOR'S
MANUAL . This manual should be kept
in the tool box and remain in the vehi-
cle at all times.
Stopping the Engine

WARNING
Avoid parking on slope.
Release throttle and completely stop
the vehicle.
Apply the parking brake by using brake
lever lock on brake lever.
Set transmission lever in PARK posi-
tion.
Push the engine stop switch in OFF
position.
Turn key in ignition switch to OFF.
Remove key from ignition switch.
Post-Operation Care
When vehicle is used in salt-water
environment (beach area, launching/
loading boats etc.), rinsing the vehi-
cle with fresh water is necessary to
preserve vehicle and its components.
Metallic parts lubrication is highly rec-
ommended. Use XP-S Lube (P/N 293
600 016) or an equivalent. This must
be performed at the end of each op-
erating day.
When vehicle is operated in muddy
conditions, rinsing the vehicle is rec-
ommended to preserve vehicle and its
components and to keep lights clean.
NOTE: Never use a high pressure
washer to clean the vehicle. USE
LOW PRESSURE ONLY (like a gar-
den hose).
High pressure can cause
electrical or mechanical damages.
_____________________
93