BOMBARDIER outlander max 650 efi 2006, Operator'S Manual

Page: 101 / 145

VEHICLE CANNOT REACH FULL SPEED (cont’d)
3. Air filter/box plugged or dirty.
– Check air filter and clean if necessary.
– Check deposits in air box drain.
– Check the position of the air intake tube.
4. CVT dirty or worn-out.
– Contact an authorized Bombardier ATV dealer.
5. Engine is under a protection mode.
– Ckeck speedometer multi-function display for messages.
– Speedometer CHECK ENGINE indicator lamp is on and multi-function
display shows CHECK ENGINE or LIMP HOME, contact an authorized
Bombardier ATV dealer.
TRANSMISSION LEVER IS HARD TO MOVE
1. Transmission gears are in a position that prevents the transmission lever
to work.
– Rock the vehicle back and forth to move the gears in the transmission and
allow the transmission lever to be set.
2. CVT dirty or worn-out.
– Contact an authorized Bombardier ATV dealer.
THE RPM INCREASES BUT THE VEHICLE DOES NOT MOVE
1. The transmission is on PARK or NEUTRAL position.
– Select the R, HI or LO position.
2. CVT dirty or worn-out.
– Contact an authorized Bombardier ATV dealer.
3. Water in the CVT housing.
– Contact an authorized Bombardier ATV dealer.
100
_____________________