BOMBARDIER outlander max 650 efi 2006, Operator'S Manual

Page: 74 / 145

To change pointer from one mode to
the other do the following:
– change speedometer multi-func-
tion display to the odometer (ODO)
mode
– push and HOLD display selector
button for 2 seconds to change
mode.
Speed Mode
In this mode, the pointer indicates the
speed of the vehicle.
The speedometer measures speed
from 0 to 140 km/h and 0 to 90 MPH.
RPM Mode
In this mode, the pointer indicates en-
gine RPM.
The speedometer measures engine
RPM from 0 to 9000 RPM.
NOTE: In the RPM mode, the vehicle
speed will be automatically displayed
in the multi-function display once the
vehicle moves over 10 km/h or 6 MPH.
Transmission Position Display
This display will show transmission
position.
vmo2006-007-033_c
1. Transmission position
DISPLAY FUNCTION
P Park
N Neutral
R Reverse
H
High gear
L
Low gear
NOTE: If the letter “E” is displayed
in the transmission position display, it
means that there is a electrical trans-
mission position error. Contact an au-
thorized Bombardier ATV dealer.
Multi-Function Display
NOTE: Use the selector button to
change display to the desired mode.
vmo2006-007-033_d
1. Multi-function display
Odometer (ODO)
Odometer records the total distance
travelled either in miles or kilometers.
Trip Meter (TRIP)
The trip meter records distance trav-
elled since it has been reset. Distance
travelled is displayed either in miles or
kilometers.
It can be used to establish a fuel tank
range or distance between 2 way
points for instance.
Push and HOLD display selection but-
ton for 2 seconds to reset the trip me-
ter.
_____________________
73