BOMBARDIER outlander max 650 efi 2006, Operator'S Manual

Page: 116 / 145

vmo2006-007-024_a
1. Clean out plug
2. Muffler
Block the end of the muffler with a
shop rag and start engine.
Momentarily increase engine RPM
several times to purge accumulated
carbon out of the muffler.
Stop engine and allow muffler to cool.
Reinstall the clean out plug.
Radiator
Periodically check the radiator area for
cleanliness.
vmo2006-016-007_a
TYPICAL
1. Radiator
Inspect radiating fins. They must be
clean, free of mud, dirt, leaves and any
other deposit that would prevent the
radiator to cool properly.
Remove as much deposits as you can
with your hands. If water is available
in proximity, try rinsing the radiating
fins.
If available, use a garden hose to rinse
the radiating fins.

WARNING
Never clean radiator with your
hands when it is hot. Let the radi-
ator cool down before cleaning.
CAUTION: Be careful not to dam-
age the radiating fins when clean-
ing. Do not use any object/tool that
could damage the fins. The fins are
purposely thin parts to allow effi-
cient cooling. WHEN HOSING, USE
LOW PRESSURE ONLY, NEVER USE
A HIGH PRESSURE WASHER.
See an authorized Bombardier ATV
dealer to check the performance of
the cooling system.
116
_____________________