Operator's Manual
Rev. BXXMP.01 January 2020
- Remove any trace of rust from metal parts with some emery
cloth before smearing the part with a protection product (rust-
preventer, paint, oil etc.).
CAUTION
Do not use water at high pressure for washing the
machine and especially the main valve, the solenoid
valves and electrical parts.
External washing
Before washing the machine, check that the engine is shut down
and the doors and windows are closed.
Do not, at any times, use fuel to clean the machine.
Use water or some steam. In cold climates, dry the locks after
washing or smear them with an antifreeze.
Before using the machine again, check its conditions.
Internal washing
Wash the machine interior with some water and a sponge. Do
not use water at high pressure. After washing, dry with a clean
cloth.
Washing the engine
Before washing the engine, protect the air intake filter to
prevent water from entering the circuit.
CAUTION
If the machine shall be used in a marine or equivalent
environment, protect it against salt deposits with an
adequate treatment against saltiness to prevent rust
formation.
MACHINE DISPOSAL
ONMENT
At the end of the machine life, call in a specialized firm to
dispose of it in compliance with the local or national regulations.
Battery disposal
Used lead-acid batteries cannot be disposed of as normal
industrial solid wastes. Because of the presence of harmful
substances, they must be collected, eliminated and/or recycled
in accordance with the laws of the UE. Used batteries must be
kept in a dry and confined place. Make sure the battery is dry
and the cell plugs are tight. Place a sign on the battery to warn
of not using it. If before disposal the battery is left in the open
air, it will be necessary to dry, smear the box and the elements
with a coat of grease and tighten the plugs. Do not rest the
battery on the ground; it is always advisable to rest it on a pallet
and cover it. The disposal of batteries shall be as rapid as
possible.
27/34
BOMAQ INDUSTRIES SLU
MODEL BXX MP
