Operator's Manual
Rev. BXXMP.01 January 2020
15. Push the top of the parking brake switch.
Result: The red parking brake indicator light should come on,
indicating the parking brake is on.
16. Move the transmission control lever forward, then in
reverse.
Result: The parking brake is still on, but the machine can be
moved. When back to N, the parking brake is engaged. This is
useful to work on slopes.
CAUTION
If you leave the parking brake switch on, to work on
slopes, you must be careful as this brake is abrupt, and
can cause accidents, specially if the operator forgets
about it, and puts N when driving at high speed!
Always look to the instrument panel and check the
parking brake light before driving.
17. Push the bottom of the parking brake switch. The parking
brake is off when the indicator light is off.
Test the Road Lights
18. Verify that all lights are functional.
WORKPLACE INSPECTION
WARNING
The workplace inspection helps the operator determine if
the workplace is suitable for safe machine operation. It
should be performed by the operator prior to moving the
machine to the workplace.
It is the operator's responsibility to read and remember the
workplace hazards, then watch for and avoid them while
moving, setting up and operating the machine.
Be aware of and avoid the following hazardous situations:
- Drop-offs or holes
- Bumps, floor obstructions or debris
- Sloped surfaces
- Unstable or slippery surfaces
- Overhead obstructions and high voltage conductors
- Hazardous locations
- Inadequate surface support to withstand all load forces
imposed by the machine
- Wind and weather conditions
- The presence of unauthorized personnel other possible unsafe
conditions
19/34
BOMAQ INDUSTRIES SLU
MODEL BXX MP
