Operator's Manual
Rev. BXXMP.01 January 2020
Safety cabin:
this robust element protects the driver in the
event of the load falling off of the forks or the forklift
overturning.
Type-approved driving cab in compliance with
standards ISO 3449 and EN 13510 (ROPS and FOPS).
Fork carriage:
this is a rigid element located on the front of the
mast which moves along with the load platform. It increases the
support surface of the loads, preventing them from falling on
top of the operator.
Bonnet:
protects the engine from any unauthorized handling.
Chassis:
the forklift is totally protected to prevent any contact
with the electrical circuits, tyres, etc.
Acoustic warning alarm:
when the forklift is moving in reverse,
an audible signal is activated.
Seat belt:
located on the seat and worn by the operator.
Wearing the seat belt is compulsory to prevent serious
injury in the event of an accident.
Key:
locking device that prevents any unauthorized persons
from using the vehicle.
Signaling beacon:
light indicating that the forklift is running. It is
located on top of the rear of the cabin.
SAFETY RECOMMENDATIONS
The driver of any motorized industrial forklift must be at least 18
years of age and be expressly assigned by the company. They
will also have to be trained and licensed as required by local
authorities.
Make sure that new operators are trained, monitored and
assisted by expert staff who are qualified to operate
forklifts.
Anyone who fails to meet these requirements should not be
allowed to drive a forklift truck, of any type.
The driver must be aware that, in addition to those
accidents that he or she may suffer, the equipment that
they are operating can cause injury to other people if all
of the safety rules are not carefully followed.
It is not the forklift truck in itself that is dangerous but rather the
6/34
BOMAQ INDUSTRIES SLU
MODEL BXX MP
