Boltek ANT-50, Installation & Operation Manual

Page: 15 / 33

C H A P T E R 2 - I N S T A L L A T I O N
9
Figure 3: Front View of LRX-1
Front Panel
Power LED
This green LED illuminates when the LRX-1 has 12VDC power and is turned on.
Strike LED
The yellow Strike LED flashes whenever the ANT-50 and LRX-1 detects an RF signal, usually
lightning.
GPS LED
This green LED illuminates when data is received from the GPS and pulses off once per second
when the GPS PPS signal is received.
Server 1, 2, 3 LEDs
The Server 1, 2 and 3 LEDs flash and illuminate to show the connection status to the lightning
detection network servers. Flashing indicates a connection is in progress. Solid illumination
indicates a successful connection.
Servers 4, 5 and 6 do not have status LEDs. Servers 1, 2 and 3 are control servers and have the
ability to control and configure the LRX-1. Servers 4, 5 and 6 are data only servers and cannot
control or configure the LRX-1.