Boltek ANT-50, Installation & Operation Manual

Page: 25 / 33

C H A P T E R 4 - O P E R A T I O N
19
Operation
Once connected to the local network and to the ANT-50 Lightning Sensor/GPS the LRX-1 only
requires power.
The LRX-1 will automatically connect to the configured networks and report lightning detected
within range.
Once connected to a server all further configuration can be done remotely from the server (Server 1,
Server 2 and Server 3 only).
Proper operation of the LRX-1 can be observed by a solid green server indication (Server 1, Server 2
and/or Server 3) and periodic flashing of the yellow Strike LED. A flashing green server LED
indicates the LRX-1 is trying to connect to the server but is not connected. A mostly solid yellow
strike indicator means either a local interference problem at the site or a trigger level set too low. The
situation needs to be determined at the server.
No maintenance is required beyond a periodic inspection of the ANT-50 installation and cables for
damage.
Chapter
4