Boltek ANT-50, Installation & Operation Manual

Page: 23 / 33

C H A P T E R 3 - C O N F I G U R I N G
17
Editing the LRX.ini Configuration File
Once you are logged in as shown above you can enter commands to configure your detector.
To edit the LRX.ini configuration file type:
sudo nano LRX.ini
The program is quite easy to use. Simply make the changes desired and type Control-O to save and
Control-X to exit.
Figure 8: Editing the LRX.ini Configuration File using nano
Assigning an Ethernet IP Address
The LRX-1 has DHCP enabled by default so it will automatically try to obtain an IP address if a
DHCP server is available.