Boltek ANT-50, Installation & Operation Manual

Page: 29 / 33

A P P E N D I X B – L R X - 1 D A T A F O R M A T
23
Troubleshooting
Problem:
The Strike light is constantly flashing.
Solution:
There is either an interference problem at the detector site or the trigger level is set too low. This
can only be evaluated at the server.
Problem:
The Strike light flashes once per second. The GPS light never comes on.
Solution:
The Lightning Sensor and GPS cables are swapped. Unplug them from the LRX-1 and swap the
connections.
Problem:
The Server light(s) never stops flashing. No server lights are illuminated constant green.
Solution:
This indicates the LRX-1 cannot connect to a server. Since the LRX-1 comes preconfigured for a
valid server, either Boltek’s servers by default or customer server by special order, this proba bly
indicates a network problem.
Appendix
A